- What is the difference between pc3 and ddr3?
- Can I replace pc3l with pc3?
- Is 32gb RAM overkill?
- Can I use 2 4gb and 2 8gb RAM together?
- What happens if RAM is not compatible?
- Is 1600mhz RAM good?
- Can I use pc3 10600 instead of pc3 12800?
- Can wrong RAM damage motherboard?
- Is 2rx8 better than 1rx8?
- What happens if you put ddr4 in a ddr3 slot?
- Why does my 1600mhz RAM shows 1333mhz?
- Can I use pc3l RAM in pc3 slot?
- Can I use 1.35 V instead of 1.5 V RAM?
- How do I know if RAM is compatible?
- Can I mix 2 different brands of RAM?
- Is ddr3 still good in 2020?
- Is ddr4 faster than ddr3?
- Is 1600mhz ram slow?
- Is pc3 compatible with ddr3?
- Can you mix different ddr3 RAM?
- Can I replace ddr3 with ddr4?
- Can you put ddr3/1600 1333?
- Does RAM speed matter for compatibility?
What is the difference between pc3 and ddr3?
DDR3 stands for Double Data Rate type three but does not imply a specific frequency or bus rate.
The PC3-xxxx designates the particular RAM’s speed rating and means that the memory certified as able to run at that bus speed.
So DDR3 RAM PC3-1333 runs at 1333 MHz while the PC3-1066 runs at 1066 MHz..
Can I replace pc3l with pc3?
3 Answers. PC3 is standard voltage (1.50V) where PC3L is low voltage (1.35V) – A system which requires PC3L cannot support PC3 RAM. PC3L RAM will work in a PC3 based system as it will run at the standard voltage and will inter-operate with PC3 RAM within the system.
Is 32gb RAM overkill?
Is 32GB overkill? In general, yes. The only real reason an average user would need 32GB is for future proofing. As far as just simply gaming goes, 16GB is plenty, and really, you can get by just fine with 8GB.
Can I use 2 4gb and 2 8gb RAM together?
IE you can either use the 4GB RAM or the 8GB RAM but not both at the same time. Usually you can but it depends on the motherboard. There are chips which are 4GB and 8GB, in dual channel mode this will not work. … IE you can either use the 4GB RAM or the 8GB RAM but not both at the same time.
What happens if RAM is not compatible?
Incompatible or misconfigured ram will cause the computer to “lock up” with no warning. Because on consumer PCs there is no ECC for Ram modules it is imperative to try to use compatible memory according to the system or motherboard manufacturer.
Is 1600mhz RAM good?
In general it is good enough and it actually is the fastest kind of memory supported on locked Intel motherboards before socket 1151. Though if you have a Z87/Z97 motherboard and unlocked K cpu, then getting memory faster than 1600MHz can be beneficial.
Can I use pc3 10600 instead of pc3 12800?
PC3-12800 works just fine as PC3-10600 speeds. Think of it as a car capable of going up to 120kmph on a 100kmph highway. It will work just fine. Regular DDR3 DIMMs are designed to work at 1.5 volt.
Can wrong RAM damage motherboard?
But generally, ram does not cause damage to your motherboard. Ram can only cause a problem in booting. But you can cause damage to your motherboard if you install a damaged ram which will damage the socket for the ram in your motherboard. You can damage your system if the ram is installed wrong or reverse installed.
Is 2rx8 better than 1rx8?
A = 1Rx8 means the memory chips are on one side of the RAM module and 2Rx8 means the memory chips are on both sides of the RAM module. Compatibility is generally not an issue in most cases. … On the other hand using a PC3L RAM in a PC3 RAM slot may damage it due to overvoltage.
What happens if you put ddr4 in a ddr3 slot?
A DDR3 RAM slot will provide that voltage. … This notch is in a different location on a DDR4 RAM module and a DDR3 RAM slot, so when you try and stick it in, it won’t line up and won’t insert. That’s basically to protect you from trying to jam a DDR4 RAM into a DDR3 RAM slot and damage something.
Why does my 1600mhz RAM shows 1333mhz?
You do have to enable XMP profile in BIOS to get 1600 MHz. 1333 is the default and every RAM set rated for that speed or faster will default to 1333. Go to the overclocking section of your BIOS and poke around for RAM timing and there should be an option for enable XMP. Just save and boot into windows to check it.
Can I use pc3l RAM in pc3 slot?
Yes, your laptop supports DDR3 (PC3- refers to DDR3) SODIMM memory, if the PC3L memory which you have is SODIMM (204pin) then you can install it with out any issues else if it is DIMM (240-pin) then don’t even think about it.
Can I use 1.35 V instead of 1.5 V RAM?
Yes, you can use a low voltage RAM module, rated at 1.35 V or 1.25V with a normal RAM module rated at 1.5 V. The Low voltage RAMs (DDR3L) are backwards compatible so they would work with most of the CPU and Motherboard combinations.
How do I know if RAM is compatible?
Your computer’s motherboard will also determine RAM capacity, as it has a limited number of dual in-line memory module slots (DIMM slots) which is where you plug in the RAM. Consult your computer or motherboard manual to find this information. Additionally, the motherboard determines what kind of RAM you should pick.
Can I mix 2 different brands of RAM?
As long as the types of Ram you mix are the same FORM FACTOR (DDR2, DDR3, etc) and voltage, you can use them together. … Different brands of Ram are fine to use together.
Is ddr3 still good in 2020?
Yes, it is good enough, however most motherboards these days use DDR4 ram. But if you still have a decent enough intel cpu and 16 gb of ddr3 ram you should be fine. If you have an amd fx cpu like the 8350 etc, then it is time for an upgrade. So on one hand it is enough on the other, most pc’s in 2020 will use ddr4 ram.
Is ddr4 faster than ddr3?
The speed of DDR3 is slightly slow in comparison of DDR4. While it’s speed is faster than DDR3. … The clock speed of DDR3 vary from 800 MHz to 2133 MHz. While the minimum clock speed of DDR4 is 2133 MHz and it has no defined maximum clock speed.
Is 1600mhz ram slow?
Yes DDR3 1600 will bottleneck a Skylake CPU. You really want DDR4 3000 or faster to truly take advantage of what the CPU is capable of. However, not everything will be affected by the lower RAM speed. If gaming is your focus then there are only a few game engines that perform significantly better with faster RAM.
Is pc3 compatible with ddr3?
Your new PC3-12800 will work beautifully with your mobo (At least they should). PC3-12800 is exactly the same as DDR3-1600. The PC3 rating of DDR3 modules is simply the DDR3 rating multiplied by 8 (Effectively giving a good approximation of the highest possible data transfer rate of that particular module).
Can you mix different ddr3 RAM?
Dear Mystified, You are right about mixing different RAM modules — if there’s one thing you absolutely can’t mix, it’s DDR with DDR2, or DDR2 with DDR3 and so on (they won’t even fit in the same slots). … Mixing RAM speed, however, is a slightly different matter.
Can I replace ddr3 with ddr4?
DDR4 RAM is not backwards compatible with DDR3 motherboards and vice versa. The notch has been moved to prevent accidental insertion of the wrong type of memory. You will not be able to change to DDR-4 .
Can you put ddr3/1600 1333?
Rick’s answer: Yes Anthony, those faster RAM modules will work just fine with your motherboard, they’ll just operate at the motherboard’s lower max RAM clock speed. You don’t have to worry about anything frying or sizzling on you.
Does RAM speed matter for compatibility?
Memory speeds and compatability. … Memory is designed to be backward compatible within its generation, so generally speaking, you can safely add faster memory to a computer that was designed to run slower memory. However, your system will operate at the speed of the slowest memory module installed.