Question: How Much Power Does A Cisco 2960 Switch Use?

Does Cisco 2960 support routing?

Cisco 2960 IP Routing Note – The switch supports 8 Routed SVIs and 16 static routes (including user-configured routes and the default route) and any directly connected routes and default routes for the management interface.

The switch can have an IP address assigned to each of 8 SVI..

How much power does a Cisco switch use?

As noted, PoE+ alone consumes 1,440 watts of the total. The two switches use the remaining 364 watts, or around 182 watts each, comfortably within Cisco’s rated maximum of 246 watts per switch.

How many watts does a 24 port switch use?

For instance, a 24-port PoE switch based on 802.3af has a Total PoE Budget of 300 watts. When used at full capacity, the maximum power consumption per port would be 300/24 ports or 12.5 watts per port.

How much power does an Ethernet switch use?

The original IEEE 802.3af rules that power consumption on each port of a PoE network switch can be up to 15.4W. The updated IEEE 802.3at standard also named PoE+, which is backward-compatible with IEEE 802.3af, provides up to 30W of power on each port.

How many watts does an IP camera use?

The standard type of PoE found on most IP cameras, IEEE 802.3af, can send up to 15 watts of electricity.

Is Cisco Catalyst 2960 a Layer 3 switch?

Fixed-configuration switches Layer 2 and layer 3 stackable access and distribution switches. … Layer 2 and layer 3 stackable access switches. Cisco Catalyst 2960-L Series. Layer 2 and layer 3 access switches.

How much is a Cisco switch?

Table 1.Product Part NumberProduct DescriptionBase Price (Current)WS-C2960G-24TC-LCisco Catalyst 2960 24 10/100/1000, 4 T/Small Form-Factor Pluggable (SFP) LAN Base image$3,295WS-C2960G-48TC-LCisco Catalyst 2960 48 10/100/1000, 4 T/SFP LAN Base image$5,995

How many watts does a Cisco 2960 switch use?

Table 1.Cisco Catalyst 2960-S Switch ModelDescriptionAvailable PoE PowerCisco Catalyst 2960S-24PD-L24 Ethernet 10/100/1000 PoE+ ports370WCisco Catalyst 2960S-48TD-L48 Ethernet 10/100/1000 ports-Cisco Catalyst 2960S-24TD-L24 Ethernet 10/100/1000 ports-1 Gigabit Uplinks with 10/100/100 Ethernet Connectivity10 more rows

Is Cisco 2960 a PoE switch?

The Cisco Catalyst 2960 Series with PoE allows connectivity to Ethernet-powered devices, including Cisco IP phones, wireless access points, and video cameras. The Cisco Catalyst 2960-48PST-L can support 48 PoE ports with total PoE power output capacity at 370W.

How do I enable PoE on a Cisco 2960 switch?

Type “interface fastethernet1/2,” replacing the “fastethernet1/2” with the name of an interface in which you wish to enable PoE, and then tap the “Enter” key. Then, while in interface configuration mode, type “power inline auto” and tap the “Enter” key. Repeat this step for each interface in which PoE is required.

How much power does a PoE switch provide?

As PoE technology has developed, the amount of power that can be sent over Ethernet cable has increased. IEEE-compliant PoE switches and injectors can output anywhere from 12 watts to over 70 watts of power per port.