- Why deck posts should not be set in concrete?
- Is quikrete as strong as concrete?
- How do you break concrete footings?
- How do you secure a 4×4 post in the ground?
- How much cement do I need for a 4×4 post?
- How do you keep fence posts from rotting in concrete?
- Can I pour concrete against pressure treated wood?
- What is the easiest fence to install?
- Do fence posts need concrete?
- Is 2 feet deep enough for fence posts?
- How long will a 4×4 post last in the ground?
- How do you break concrete?
- How do you remove line posts from concrete?
- Can you install fence posts without cement?
- Should pressure treated posts be set in concrete?
Why deck posts should not be set in concrete?
A deck post should always be placed on top of footing, not inside concrete because it can break.
When concrete is poured around a deck post in this way, the post will rot due to moisture buildup by the soil.
Is quikrete as strong as concrete?
Simple answer is yes, if you follow the directions. If you are say patching a hole in the driveway, the Quikrete 5000 will reach a compressive strength at 28 days as high or higher than what you are likely to get from a ready mix plant. They are usually delivering 3500 -4000 PSI concrete.
How do you break concrete footings?
Break the concrete footing into two or more sections, using a cold chisel and steel mallet. Drive the tip of the chisel into the seam between the base of the post and top of the concrete until the concrete breaks. Repeat this on the opposite side of the post.
How do you secure a 4×4 post in the ground?
Project InstructionsDig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). … Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole. … Set the post into the hole and attach 2×4 braces to adjacent sides of the post.More items…
How much cement do I need for a 4×4 post?
Related To: The general rule of thumb when setting a post is that the depth of the post’s hole needs to be 1/3 to 1/2 of the actual above-ground height of the post.
How do you keep fence posts from rotting in concrete?
The ideal solution is to eliminate contact between soil and wood. Using a metal post anchor set in concrete is probably the most effective method for achieving maximum longevity. To help keep the post from wicking water, choose an anchor that spaces the post bottom away from the concrete.
Can I pour concrete against pressure treated wood?
YES. Any exterior concrete that is in contact with earth may wick moisture. Thus, it is required to place pressure treated wood directly against the concrete if one wishes next to build off that concrete with untreated wood.
What is the easiest fence to install?
Vinyl fencing installation is so much easier the no-dig way. This means you can spend less time on your house projects and more time with your family, friends, or whatever else you want to do.
Do fence posts need concrete?
Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.
Is 2 feet deep enough for fence posts?
The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.
How long will a 4×4 post last in the ground?
If you find the RV posts I mentioned earlier, they are steel, treated and when put in concrete will last 25 years or more. It will not last long (7 yrs max) if the bottom of the post is wet. If you place stone at the base of the post, it should last 20+ yrs.
How do you break concrete?
When thinking about breaking up concrete, most of our minds jump straight to jackhammer. But you can probably do the work with a metal sledgehammer and a little elbow grease. Sledgehammer is the best tool to use if the slab of concrete is three inches thick or less. Dig at the base of the slab to find the bottom.
How do you remove line posts from concrete?
Dig around the cement base with a shovel. If your pole doesn’t have a cement base, dig around the pole until you’re able to lean against the pole, working it loose. You can then remove the pole.
Can you install fence posts without cement?
How to Easily Install a Fence Post Without Cement Using Wood Post Anchors, Gravel, or a Hydraulic Driver. Wood post anchors are some of the easiest ways to install a fence post, and offer other benefits, like protection from water and weed eaters.
Should pressure treated posts be set in concrete?
A: Actually, your point is well taken. Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. … Concrete should be poured around the post – no concrete under the post.